Manuals / Furuno / Marine Equipment / Marine GPS System

Furuno 1943C-BB, FURUNO MARINE RADAR, 1953C-BB, 1933C-BB, 1823C-BB OfferedSP 4by Busse-Yachtshop.de

Models: FURUNO MARINE RADAR 1823C-BB 1953C-BB 1933C-BB 1833C-BB 1943C-BB

1 252

Download 252 pages 38.1 Kb

Page 242

5.9	Electronic Chart	FURUNO chart card or NAVIONICS chart card available
		C-MAP chart card also available for C-MAP NT Model
5.10	Alarms	Arrival and Anchor watch, Cross track error and proximity
		alarms, Ship’s speed in and out alarms, Water temperature,
		Trip alarm, Fish alarm, Bottom alarm (ETR required)

6 POWER SUPPLY

6.1Rated Voltage/Current

	M1823C-BB	12-24 VDC: 3.6-1.9 A
	M1833C-BB	12-24 VDC: 5.0-2.4 A
	M1933C-BB (24rpm)	12-24 VDC: 5.3-2.6 A
	M1933C-BB (48rpm)	12-24 VDC: 6.7-3.2 A
	M1943C-BB (24rpm)	12-24 VDC: 6.0-2.9 A
	M1943C-BB (48rpm)	12-24 VDC: 7.7-3.6 A
	M1953C-BB (24rpm, XN12 A) 12-24 VDC: 7.3-3.5 A
	M1953C-BB (48rpm, XN12 A) 12-24 VDC: 8.8-4.1 A
	M1953C-BB (24rpm, XN13 A) 12-24 VDC: 7.4-3.6 A
6.2	Rectifier (option)	100-115/220-230 VAC, 1 phase, 50/60 Hz
7	ENVIRONMENTAL CONDITION
7.1	Ambient Temperature	Antenna Unit: -25°C to +70°C
		Processor Unit and Control Unit: -15°C to +55°C
		Remote Controller: +5°C to +45°C
		Power Supply Unit: -15°C to +55°C
7.2	Relative Humidity	93 % ±2% at +40°C
7.3	Waterproofing	Antenna Unit: IPX6
		Control Unit: IPX5 (Front panel), IPX2 (Rear panel)
		Processor Unit, Power Supply Unit: IPX0
7.4	Bearing Vibration	IEC 60945-4th
8	COATING COLOR
8.1	Processor & Control Unit	N3.0

8.2Antenna Unit

M1823C-BB/1833C-BB N9.5 (upper), 2.5PB3.5/10 (lower) M1933C-BB/1943C-BB/1953C-BB N9.5

offeredSP - 4by Busse-Yachtshop.de

Image 242

Furuno 1943C-BB, FURUNO MARINE RADAR, 1953C-BB, 1933C-BB, 1823C-BB, 1833C-BB manual OfferedSP 4by Busse-Yachtshop.de

Contents

Offered by Busse-Yachtshop.de 00014749700 Safety Instructions Table of Contents Iii Plotter Operation Video Sounder Operation Customizing Your Unit MAINTENANCE, Troubleshooting ViiForeword ViiiFeatures Model Output Range RadarSystem Configurations Single-unit NavNet system GD-1900C-BB Single-unit NavNet system GD-1900C-BBTwo-unit NavNet system XiiTwo-unit NavNet system Three-or-more-unit NavNetOperational Overview Control unit Operating ControlsOverview of control unit Soft keys Radar and plotter displaysProcessor unit Inserting a Chart CardChart card and card remover Turning the Unit On/Off Startup sequenceNight Day Twilight Adjusting Hue, Panel IlluminationHue window Panel brilliance windows Selecting a DisplayDisplay modes Display screensRadar combination screen selection window Selecting a displayDisplay screen selection window Switching control in combination and overlay screens To adjust plotterRadar source and sounder source windows Selecting image sourceSelect source menu Trackball, Cursor Cursor, cursor dataMOB mark messages Entering the MOB Mark, Setting MOB as DestinationMOB concept Data boxes Data BoxesShowing, hiding data boxes with soft key Rearranging data boxes Temporarily erasing a data boxExecuting a function Function Default Setting, Key LabelFunction Keys Simulation setup menu Simulation DisplayPlotter RadarNavNet processor unit-generated echoes Sounder Radar Display Radar displayTuning window TuningAdjusting the Gain Transmitting, Stand-byGain adjustment soft key Gain sensitivity windowReducing Sea Clutter Adjusting the A/C SEASEA setting window How the A/C SEA worksReducing Precipitation Clutter Adjusting the A/C RainRain setting window Range scales km Range ScaleRange scales nm, sm Signal process soft keys PulselengthRadar display soft keys Presentation ModeSelecting a presentation mode Description of presentation modes Head-up presentation modeCourse-up presentation mode Head-upNorth-up North-up presentation modeTrue motion presentation mode True motionMeasuring the Range Measuring range by range ringsMeasuring range by VRM How to measure range to a target with the cursorMeasuring range by cursor EBL/VRM soft keysErasing VRM data boxes How to measure range with the VRMErasing a VRM, VRM indication Hiding VRM data boxesMeasuring bearing by cursor How to measure bearing with the EBLMeasuring the Bearing Measuring bearing by EBLMoving EBL data boxes Erasing EBL data boxesHiding EBL data boxes Erasing the Heading Line, North Marker Reducing Noise InterferenceRejecting Radar Interference Radar interferenceZooming in on ARP, TTM targets ZoomZooming in on radar targets ZoomTarget no. selection window Shifting the PictureManual shift Shifting the picture manuallyAutomatic shift Setting automatic shift maximum speedAuto ship speed setting window Automatic shiftPredicting collision course with the offset EBL Using the Offset EBLPredicting collision course Measuring range & bearing between two targets Measuring range and bearing between two targetsSample echo trails Echo TrailsTrail time Trail soft keysMultitone and monotone trails Starting echo trailsTrail gradation Trail color Echo trail modeTrail mode window Trail color windowEcho Stretch Types of echo stretchEcho Averaging Effect of echo averagingOutputting TLL Data Target soft keysHow to set a guard alarm zone Guard AlarmSetting a guard alarm zone When the alarm is violated… Canceling the guard alarmHow watchman works Setting watchman stand-by intervalWatchman Turning on/off watchmanSuppressing Second-trace Echoes Second-trace echoesWaypoint Marker Waypoint markerUsage precautions for ARP 26 ARP, TTM OperationARP target info window ARP setup menuActivating/deactivating ARP, TTM Manual acquisition ARP plot symbolsAcquiring and tracking targets ARP Automatic acquisitionARP target number Displaying target number ARP, TTMAutomatic acquisition area Terminating tracking of selected targets Cancel all targets windowTerminating tracking of ARP targets Terminating tracking of all targetsVector reference, vector time Setting vector attributes ARPWhat is a vector? History interval window Displaying past position ARPPast position displays 26.7 ARP, TTM target data ARP target data26.8 CPA/TCPA alarm ARP CPA windowTcpa window Lost target alarm ARPCanceling a lost target Lost target markMinimum and maximum ranges Interpreting the Radar DisplayGeneral Range resolution Radar resolutionBearing resolution Bearing accuracyMultiple echoes False echoesMultiple echoes Sidelobe echoesShadow sectors Virtual imageVirtual image Shadow sectorsAppearance of Sart signal on the radar display Sart Search and Rescue TransponderGeneral procedure for detecting Sart response General remarks on receiving SartSEA control Appearance of racon signal on the radar displayRacon Radar Beacon Rain controlFull-screen plotter display Plotter DisplaysFull-screen plotter display Contents of nav data window Nav data windowCompass display Compass displayXTE range setting window Reading the XTE cross-track error monitorSetting the range for the XTE monitor Highway display Highway displayNav data display Nav data displaysPlotter display, north-up mode North-upAuto course-up Plotter display, auto course-up modeCourse-up Plotter display, course-up mode, destination setShifting the Display Chart ScaleCharts scales Chart icons and their meanings Chart CardsChart card overview When a chart cannot be displayed Indices and chart enlargementSample chart Japan, showing indices Data for aids to navigation Furuno and NavCharts chartsChart symbols Current or tide data Port service iconsPlotter display, showing port service display Current data displayObjects window MAP chartsCursor and data display Example of caution area windowObject windows Icon dataLighthouse icon Sample lighthouse data Tide informationDate window Map, port service displayTide window Own ship track Working with TrackDisplaying track Track control menuStopping, restarting plotting of own ship track Target tracksOwn ship track color window Changing track colorOwn ship’s track Target trackInterval window Track plotting method and interval for own ship trackTrack plotting method Track plotting intervalChanging own ship track/mark distribution setting Track memory windowErase menu Erasing trackErasing own ship track by area Erasing all own ship track Erasing own ship track by colorErase track by color window Erasing all target tracksChanging mark attributes Marks, LinesEntering a mark, line Marks & lines menuSelect Lines STYLE, then press the Aedit soft key Selecting line typeMarks shape window Lines style windowErasing an individual line Erasing marks, linesErasing an individual mark Erasing marks, lines by areaEntering a waypoint at own ship position WaypointsEntering waypoints Entering a waypoint with the cursorWaypoint mark shape selection window Waypoint mark color selection windowEntering a waypoint by range and bearing Alphanumeric and local waypoint lists Editing waypoint dataEntering a waypoint from the waypoint list Editing waypoint data from the waypoint listEditing a waypoint from the plotter display Plotter displayErasing a waypoint from the menu Erasing waypointsErasing a waypoint directly from the plotter display Erasing a waypoint from the waypoint listChanging waypoint mark size FURUNO, NavCharts Chart details menuSearching waypoints Alphanumeric listEntering a route with existing waypoints RoutesCreating routes Route menuNew route entry screen Entering a route with the cursorSave route window Creating voyage-based routesSave route menu To stop recording waypoints and save the route Displays for entry of time, distance intervalFor manual entry of waypoints, do the following Connecting routes Connect route windowEdit route menu Inserting waypointsInserting a waypoint from the route list Waypoint list for editing a route local listInserting a waypoint from the plotter display Inserting a waypoint in an intermediate location on a routeRemoving a waypoint from the route list Removing waypoints from a routeErasing routes Removing a waypoint from the plotter displaySelecting quick point entry method NavigationNavigating to a quick point Go to method windowSelecting a waypoint from the plotter display Navigating to waypointsNavigating to multiple quick points Selecting a waypoint from the waypoint listQP window Navigating to ports, port services NavCharts/C-MAPSelecting an external waypoint Port services and sample port list Sample filling station locations southern ItalyPlotter display, route selected as destination Following a routeSelecting the route to follow Navigating waypoints in reverse orderLog display Example of when to restart navigationRestarting navigation Automatic waypoint switching methods Setting speed for ETA calculationSwitching waypoints Select speed for ETA windowCanceling route navigation Plotter alarm menu AlarmsAudio alarm on/off Audio alarm windowArrival alarm window Arrival alarmHow the arrival alarm works Anchor watch alarm window Anchor watch alarmHow the anchor watch alarm works How the XTE alarm works XTE Cross-Track Error alarmSpeed alarm XTE alarm windowProximity mark Proximity alarmProximity alarm window Trip alarm Trip alarm windowAlarm information Plotter alarm menu,Message Meaning Alarm messagesPlotter alarm messages and their meanings Resetting Trip Distance General setup menu,Principle of Operation Underwater conditions and video sounder displaySelecting a sounder display Display mode windowSounder Displays Indications on the single frequency display Description of sounder displaysSingle-frequency display Selecting transmission frequencyHF picture Dual-frequency displayDual-frequency display LF picture Sounding area and transmission frequencyBottom-zoom display plus normal sounder display Marker-zoom display plus normal sounder displayBottom-zoom display Bottom-lock display Bottom-lock display plus normal sounder displayScope display display only Bottom discrimination displayBottom discrimination display Scope displaySelecting screen split method in combination displays How the automatic sounder works How to enable automatic sounder operationAutomatic Sounder Operation Types of automatic sounder modesManual Sounder Operation Selecting the manual modeAdjusting the gain Selecting display rangeShift concept Shifting the rangeGain window How to measure depth and time Measuring Depth, TimeNoise limiter window Reducing InterferenceTypes of interference Clutter window Reducing Low Level NoiseAppearance of clutter Appearance of weak echoes Signal level windowErasing Weak Echoes White marker window Color bar 16 color when white marker function is activeWhite Marker Picture advance window Picture Advance SpeedAdvancement independent of ship’s speed How the speed-dependent picture advance mode works Advancement synchronized with ship’s speedHue No Echo Color Background Color Display ColorsHue no. and background and echo colors Sounder alarm menu Alarm audio windowBottom alarm window Bottom alarmFish alarm Fish alarm windowFish alarm B/L Fish alarm B/L windowWater temperature alarm Water temperature alarm windowWhen an alarm setting is violated Depth AlarmWater Temperature Graph Sounder alarm messages and their meaningsChanging Pulse Repetition Rate Bottom echo Interpreting the Sounder DisplayZero line Zero lineFish school echoes Fish school echoesSurface noise/Aeration Surface noise/aerationGeneral Setup General setup menuContents of general setup menu Radar display setup menu Radar SetupRadar display setup Contents of radar display setup menu Con’t on nextContents of radar display setup menu con’t from previous Model Maximum Range Radar range setupRadar range setup menu Radar function key menu Function key setupFunction Key Default Function Function Key Label Radar function key optionsRadar function keys Menu Item Function Function KeyNavigation options Plotter SetupPlotter setup menu Contents of plotter setup menu Function Default Function Function Key Label Plotter function key menuPlotter function keys Plotter display, chart offset selected Chart SetupChart offset FURUNO, NavCharts chart attributes Chart details menu FURUNO, NavChartsContents of chart details menu FURUNO, NavCharts Chart details menu C-MAP MAP chart attributesContour line menu FURUNO, NavCharts Bcntour Line soft keyContents of chart details menu C-MAP Settings description Adepth Info soft keyData Boxes Setup Data box menuHot Page Setup Hot page setup menuHot page setup menu, Split X 3 screen, sub screen selection HOTNavigation data source Navigator SetupContents of nav setup menu GPS receiver setup Set equipped with GP-310B/320B GPS setup menu Contents of GPS setup menuContents of GPS setup menu con’t from previous Bgps Waas Setup Contents of Waas Setup menuDisplaying Loran C TDs TD display setupTD setup menu Loran GRI & station pair windowDisplaying Decca TDs Decca chain and station pair windowNav data setup window Nav Data Display SetupNav data setup screen Sounder system setup menu Sounder SetupSystem setup Sounder system setup menu descriptionSounder system setup menu description con’t from previous SM1-SM4, OFFSensor setup menu settings Sensor setupSensor setup menu Sounding range, zoom range, bottom lock range Sounder range setup menuDefault basic ranges Zoom range and bottom-lock rangesSounder function key options Function Default Function Function KeySounder function key menu Sounder function keys Save data menu Memory Card OperationsFormatting memory cards Saving data to a memory card Message Reason Remedy Memory card messagesMemory card messages Playing back data from a memory card Load data menuHost name window Receiving Data Via Network EquipmentReceive data menu Marks & lines windowOutputting Data Through the Network Select sentence menuReplacement of the battery Preventive MaintenanceReplacement Maintenance programReplace of the synchro belt Replacement of the fuseReplacement of the magnetron Trackball Maintenance Part Type Code No Retainer ring and ball MU3721 000-144-645Radar troubleshooting Simple TroubleshootingGeneral troubleshooting RadarPlotter troubleshooting PlotterSounder troubleshooting SounderMemory I/O Test menu DiagnosticsMemory I/O test GPS sensor test Requires GPS Receiver GP-310B/320B Processor unit testProcessor unit test results GPS receiver test resultsNetwork sounder test results ARP test resultsTest pattern Test pattern sequenceScreen for testing keyboard, remote controller Keyboard test of the control unitGPS Status Display GPS status displayWindows for clearing memory Clearing MemoriesMemory clear menu Error Message Meaning Remedy Error MessagesError messages Menu Overview Menu keyAP-2 AP-3 AP-4 AP-5 AP-6 AP-7 AP-8 Plotter Alarms Alarm keyRadar Alarms Sounder AlarmsGeodetic Chart List World Time Chart Icons Icon MeaningWhat is WAAS? WaasThis page is intentionally left blank OfferedSP 1by Busse-Yachtshop.de OfferedSP 2by Busse-Yachtshop.de OfferedSP 3by Busse-Yachtshop.de OfferedSP 4by Busse-Yachtshop.de Specifications of Video Plotter GD-1900C-BB OfferedSP 6by Busse-Yachtshop.de Index Index-2 Index-3 Index-4 Index-5 Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de Offered by Busse-Yachtshop.de