3. PLOTTER OPERATION

3.8.3Erasing waypoints

Erasing a waypoint directly from the plotter display

1.Operate the trackball to place the cursor on the waypoint you want to erase. A flashing diamond mark appears over the waypoint when the waypoint is correctly selected.

2.Press the [CLEAR] key. You are asked if you are sure to erase the waypoint.

3.Push the [ENTER] knob. The waypoint is erased from the plotter screen and the waypoint list.

Erasing a waypoint from the menu

1.Press the [MENU] key followed by the C:WAYPOINTS/ROUTES and A:WAYPOINTS soft key to open the waypoint menu.

2.Press the C:WAYPOINT BY CURSOR soft key.

3.Operate the trackball to place the cursor on the waypoint which you want to erase. A flashing diamond mark appears on the waypoint when it is correctly selected.

4.Press the D:EDIT/MOVE soft key followed by the D:ERASE WPT soft key. You are asked if you are sure to erase the waypoint.

5.Push the [ENTER] knob to erase the waypoint.

6.Press the [MENU] key to close the menu. The waypoint is erased from the plotter screen and the waypoint list.

Erasing a waypoint from the waypoint list

1.Press the [MENU] key to open the menu.

2.Press the C:WAYPOINTS/ROUTES and A:WAYPOINTS soft keys.

3.Press the A:LOCAL LIST or B:ALPHANUMERIC LIST soft key.

4.Use the trackball to select the waypoint you want to erase.

5.Press the D:ERASE WPT soft key. You are asked if you are sure to erase the waypoint.

6.Push the [ENTER] knob. The waypoint is erased from both the waypoint list and the plotter screen (if it is currently displayed).

7.Press the [MENU] key to close the menu.

offered by Busse-Yachtshop.de

3-33

Page 115
Image 115
Furuno 1953C-BB Erasing waypoints, Erasing a waypoint directly from the plotter display, Erasing a waypoint from the menu