Furuno 1833C-BB, FURUNO MARINE RADAR, 1953C-BB, 1943C-BB, 1933C-BB Plotter Setup, Navigation options

5. CUSTOMIZING YOUR UNIT

5.3Plotter Setup

This paragraph provides the information necessary for setting up the plotter display.

5.3.1Navigation options

Navigation options, for example, waypoint switching method, may be set on the PLOTTER SETUP menu.

1.Show the plotter display, then press the [MENU] key open the main menu.

2.Press the B:PLOTTER SETUP soft key.

WAYPOINT SWITCHING	ARRVL ALM CRCL
COURSE VECTOR	LINE
SET GOTO METHOD	1POINT
QP	INTERNAL

PLOTTER SETUP

A EDIT

BD. BOX

E RETURN

Plotter setup menu

Contents of plotter setup menu

Item	Description	Settings
Waypoint	Chooses waypoint switching method. See	Perpendicular, Arrvl Alm
Switching	“switching waypoints” on page 3-50.	Crcl, Manual
Course	You may extend a line from the own ship position to	Line, Vector, Off
Vector	show ship’s course. It may be a vector (length
	depends on ship’s speed) or a simple line (course
	bar).
Set GOTO	Sets the method by which to navigate to a quick	1 Point, 35 Points,
Method	point. See “3.10.1 Navigating to a quick point.”	35 Pts/Port Service
B:D. BOX	Sets up data boxes. See paragraph 5.5.
(soft key)
QP	To display destination waypoint from a external	· EXT WPT (RMB)
	navigator connected, set “EXT WPT (RMB).”	· INTERNAL

offered by Busse-Yachtshop.de 5-9