Furuno 1953C-BB, 1943C-BB manual Memory Card Operations, Formatting memory cards, Save data menu

6. DATA TRANSFER

6.DATA TRANSFER

This chapter provides information for saving and replaying data to and from memory cards, uploading and downloading data, loading waypoint data from Yeoman, and outputting data through the network.

6.1Memory Card Operations

The memory cards store these data: marks, lines, waypoints, routes, track, and setting data (plotter only).

6.1.1Formatting memory cards

Before you can use a memory card it must be formatted. This prepares the card for use with the system. Note that formatting a memory card erases all data from the card.

1.Insert a blank memory card into the card slot.

2.Press the [MENU] key followed by the E:SYSTEM CONFIGURATION, D:DATA TRANSFER, A:SAVE/LOAD DATA and C:SAVE DATA TO MEMORY CARD soft keys to show the SAVE DATA menu.

▲

TRACKS

MARKS & LINES

WAYPOINTS & ROUTES

SETTING DATA

OFF

OFF

OFF

OFF

SAVE DATA

A EDIT

B SAVE

D	FORMAT
E	RETURN

Save data menu

3.Press the D:FORMAT soft key. You are asked if you are ready to format the memory card.

4.Push the [ENTER] knob to format (or press the [CLEAR] key to escape). “NOW FORMATTING MEMORY CARD” appears. Do not remove the card while it is being formatting. When the formatting is completed, “FORMAT COMPLETED. PUSH ENTER KNOB TO CONTINUE.” appears.

5.Push the [ENTER] knob to continue.

Note: If the memory card was not inserted correctly, the message “FAILED TO FORMAT MEMORY CARD.” appears.

offered by Busse-Yachtshop.de 6-1