Furuno 1933C-BB, FURUNO MARINE RADAR Erasing track, Erasing own ship track by area, Erase menu

3. PLOTTER OPERATION

3.6.6Erasing track

This paragraph shows you how to erase own ship’s track and target tracks. You can erase ship’s track three ways: collectively, by color and by area.

Erasing own ship track by area

You can erase own ship’s track by area as below. This feature is not available when the overlay mode is in use.

1.Press the [MENU] key followed by the A:CHART SETUP, B:TRACKS & MARKS CONTROL and C:ERASE T & M soft keys to show the ERASE menu.

ERASE ALL TRACKS ERASE TRACKS BY AREA ERASE TRACKS BY COLOR ERASE TARGET TRACKS ERASE ALL MARKS/LINES ERASE MARKS BY AREA

SHIP’S TRACK STATUS

TRACKING

TRACK: 1234/2000

MARK : 9/6000

ERASE

A EDIT

E RETURN

Erase menu

2.Use the trackball to select ERASE TRACKS BY AREA, then press the A:EDIT soft key. The menu is erased and the plotter display appears.

3.Use the trackball to place the cursor at the top left-hand corner of the area which you want to ease track from.

4.Press the C:START soft key or the [ENTER] knob.

5.Move the cursor to the bottom right-hand corner of the area which you want to ease track from.

6.Press the C:END soft key or the [ENTER] knob. You are asked if you are sure to delete the track.

7.Push the [ENTER] knob to delete the track selected.

8.Press the [MENU] key twice to close the menu.

offered by Busse-Yachtshop.de 3-23