Furuno 1953C-BB, FURUNO MARINE RADAR manual Plotter function keys, Menu Item Function Function Key

5. CUSTOMIZING YOUR UNIT

4.Select function desired with the trackball, then press the C:ENTER soft key or [ENTER] knob to register your selection.

5.Press the [MENU] key to close the menu.

Plotter function keys

Menu Item	Function	Function Key
		Label
OFF	Assigns no function.	—
ADD: ADD NEW WPT	Registers waypoint at cursor position. Place cursor	ADD
	for waypoint location, then press function key.
MWP: MOVE WPT	Moves selected waypoint to different position.	MWP
	Select waypoint, press function key, select new
	position, then press the [ENTER] knob.
RUL: RULER	Measures range and bearing between two points.	RUL
	Press D:START POINT soft key to change starting
	point if necessary. Range and bearing between two
	points appears at the top of the screen.
GWP: GOTO WPT	Specify waypoint to set as destination. Enter	GWP
	waypoint name in window, then press the C:ENTER
	soft key.
GRT: GOTO ROUTE	Specify route to follow. Enter route name in window,	GRT
	then press the C:ENTER soft key.
EML: EDIT MK/LINE	Displays mark & line menu. Press appropriate soft	EML
	key to access menu item.
TRK: TRACK ON/OFF	Each press starts or stops recording/plotting own	TRK
	ship’s track.
TTM: TTM ON/OFF	Turns TTM (target track) display on/off.	TTM
DTT: DEL TGT TRACK	Erases all TTM track.	DTT
ALP: ALPHA LIST	Displays waypoint alphanumeric list.	ALP
LCL: LOCAL LIST	Displays waypoint local list.	LCL
RTE: ROUTE LIST	Displays route list.	RTE
DBX: D. BOX ON/OFF	Shows/hides data boxes.	DBX
CHG: CHANGE CNTRL	Changes control in combination screen.	CHG

Note: To use CHANGE CNTRL set it on all displays, with the same soft key number.

offered by Busse-Yachtshop.de 5-11