using with a Windows computer
USING THE Intelli-studio PROGRAMME
Using the
4UFQ$POOFDUJOHUIF64#DBCMF
1.Set the “USB Connect: Mass Storage” and “1$4PGUXBSF0O” t :PVXJMMmOEUIFEFGBVMUNFOVTFUUJOHTBSFTFUBTUIFBCPWF
2.Connect the camcorder and the PC with the USB cable.
t "OFXmMFTBWJOHTDSFFOBQQFBSTXJUIUIF*OUFMMJTUVEJPNBJO window.
t "DDPSEJOHUPZPVSDPNQVUFSUZQFUIFDPSSFTQPOEJOH removable disk window appears.
3.Click “Yes,” the uploading procedure will start. Click “Yes” to confirm.
t *GZPVEPOPUXBOUUPTBWFBOFXmMFTFMFDUi/P”
PC Software |
Off |
On |
1/1 |
To disconnect the USB cable
After completing the data transfer, make sure to disconnect the cable in the following way:
1.Click the “Safely Remove Hardware icon” icon on the taskbar.
2.Select “USB Mass Storage Device,” and then click “4UPQ”
3.If the “Stop a Hardware device” window appears, click “0,”
4.Disconnect the USB cable from the camcorder and PC.
t 6TFUIFQSPWJEFE64#DBCMF 4VQQMJFECZ4BNTVOH
t %POUBQQMZFYDFTTJWFGPSDFXIFOJOTFSUJOHPSFYUSBDUJOHUIF64#DBCMFJOUPGSPNB64#KBDL t *OTFSUB64#BGUFSDIFDLJOHUIFEJSFDUJPOPGJUTJOTFSUJPOJTDPSSFDU
t 8FSFDPNNFOEVTJOHUIF"$QPXFSBEBQUPSBTUIFQPXFSTVQQMZJOTUFBEPGUIFCBUUFSZ t 8IFOUIF64#DBCMFJTDPOOFDUFEUVSOJOHUIFDBNDPSEFSPOPSPGGNBZDBVTFUIF1$UP
malfunction
t *GZPVEJTDPOOFDUUIF64#DBCMFGSPNUIF1$PSUIFDBNDPSEFSXIJMFUSBOTGFSSJOHUIFEBUB transmission will stop and the data may be damaged.
t *GZPVDPOOFDUUIF64#DBCMFUPB1$WJBB64#)6#PSTJNVMUBOFPVTMZDPOOFDUUIF64#DBCMF along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the camcorder.
t "DDPSEJOHUPZPVSDPNQVUFSUZQFUIF*OUFMMJTUVEJPQSPHSBNNFNBZOPUBVUPNBUJDBMMZSVO*OUIJT case, open the desired
t 8IFOBO64#DBCMFJTDPOOFDUFEBDDPSEJOHUPUIFBQQMJDBUJPOQSPHSBNNF FH&NP%JP JOTUBMMFE
110on your computer, the corresponding programme may start first of all.
