Samsung HMX-R10 user manual First time settings, Time zone screen appears again

first time settings

SETTING THE TIME ZONE AND DATE/TIME FOR THE FIRST TIME

Set the date and time of your local area when turning on this camcorder for the first time.

1.Open the LCD screen to turn on the camcorder.

•Your camcorder turns on automatically when you open the LCD screen.

•The Time Zone (“Home”) screen appears based on Lisbon, London (Greenwich Mean Time).

•You can also set your current time zone from the

Home

London, Lisbon

[GMT 00:00] JAN/01/2009 12:00 AM

OK

	“Settings” menu. page 95					Date/Time Set
2.	Select your local area on the map by touching the left (				)
						Month		Day	Year
	or right (	) tab on the LCD screen, then press the ( OK ) tab.				JAN	/	01	/ 2009
	• The “Date/Time Set” screen appears.					Hour		Minute
						12	:	00	AM
3.	Touch the date and time information, and change the									OK
	setting values by using the up (		) or down (	) tabs.
4.	Make sure the clock is correctly set, then touch the ( OK )					Date/Time Set
	tab.					Year		Month		Day
						Date/Time Set				06
						2009			01
	• The message “Date/Time Set” appears.					JAN/01/2009 12:00AM
						Hr			Min

• If you finish the setting with ( ) tab without touching	1 / 1 11	55	AM
the ( OK ) tab, the date/time values are not applied and			OK

the <Time zone> screen appears again.

•The year can be set up to 2039, based on “Home” item.

•Set “Date/Time Display” to “On.” page 92

•Activating the () icon forwards the time by 1 hour.

Built-in rechargeable battery

•Your camcorder includes a built-in rechargeable battery that retains the date and time settings even after the power is turned off.

•Once the battery is depleted, the previous date/time values are all reset to defaults, and you need to recharge the built-in rechargeable battery. The date/time must be set again.

•Battery capacity decreases over time and through repeated use. If you find the decreased usage time between charges becomes significant, replace your battery.

Charging the built-in rechargeable battery

•The built-in battery is always recharged while your camcorder is connected to the AC power or while the battery pack is attached.

•If the camcorder is not in use for about 2 weeks without connecting to the AC power or

attaching the battery pack, the built-in battery fully discharges. If this occurs, charge the
built-in battery by connecting to the supplied AC adaptor for 24 hours.	35