BN68-00678A-01_066~81 2004.4.28 6:18 PM Page 75
Notes:
Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported:
Video Signal | Resolution | Vertical | Horizontal | Vertical | Horizontal | |
| (Dot X Line) | Frequency(Hz) | Frequency(KHz) | Polarity | Polarity | |
|
|
|
|
|
|
|
| 720 | X 400 | 70.087 | 31.469 | P | N |
|
|
| 59.940 | 31.469 | N | N |
| 640 | X 480 | 72.809 | 37.861 | N | N |
| 75.000 | 37.5 | N | N | ||
|
|
| ||||
|
|
| 85.008 | 43.269 | N | N |
IBM PC / AT |
|
| 56.250 | 35.156 | N/P | N/P |
|
| 60.317 | 37.897 | P | P | |
Compatible | 800 | X 600 | 72.188 | 48.077 | P | P |
|
|
| 75.000 | 46.875 | P | P |
|
|
| 85.061 | 53.674 | P | P |
|
|
| 60.004 | 48.363 | N | N |
| 1024 X 768 | 70.069 | 56.476 | N | N | |
|
|
| 75.029 | 60.023 | P | P |
| 1280 | X 1024 | 60.020 | 63.981 | P | P |
(N: Negative / P: Positive)
•The interlace mode is not supported.
•The PDP operates abnormally if a
•The table above conforms to IBM/VESA regulations and is based on using the Analog Input.
•“1280 x 1024” is not available in DVI mode.
Notes:
•The PC text quality for
•When this PDP is used as a PC display,
•Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.)
Check your PC instruction book for information about connecting your PC to a PDP.
•If a vertical and horizontal
•In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control or SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the PC is connected.
•Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise, random signals might appear).
75
