Samsung HP-P5031 manual

Cable with a Cable Box that Descrambles Some (But Not All) Channels

To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store).

Find and disconnect the cable that is

1 connected to the ANTENNA IN terminal of your cable box.

This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN". Connect this cable to a two-way splitter.

Connect a coaxial cable between an

2 OUTPUT terminal of the splitter and the IN terminal of the cable box.

Connect a coaxial cable between the

3 ANTENNA OUT terminal of the cable box and the B-IN terminal of the A/B switch.

Connect a coaxial cable between the

4 ANTENNA OUT terminal of the cable box and the B-IN terminal of the A/B switch.

Connect the last coaxial cable between the

5 OUT terminal of the RF (A/B) switch and the VHF/UHF terminal on the PDP.

After you've made this connection, set the A/B switch to the "A" position for normal viewing.

Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually channel 3 or 4.)

20