Fixing the TV panel to the wall attachment panel bracket
The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same)
1 Remove the 4 screws on the back of the product.
2 Insert the screw 
into the plastic hanger. (See the figure below)
•Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers.
•Be careful when installing the product on the bracket as fingers can be caught in the holes.
•Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place after installation.
Tighten the 4 screws in step 2 (plastic
3 hanger + screw 
) to the rear holes of the product.
Remove safety pin (#) and insert the 4
4 product holders into the corresponding bracket holes (!). Then place the product (@) so that it is firmly fixed to the bracket. Make sure to reinsert and tighten the safety pin (#) to securely hold the product to the bracket.
PDP
Wall Bracket Wall
15
