Samsung HPM5027 manual Information, Power Saver PC mode only

Information

Preset:

•Press the RGB button to select the PC mode.

Press the Menu button. Move the joystick up or

1 down to select the SETUP, then press the joystick to enter.

Move the joystick up or down to select the “Miscel-

2 laneous”, then move the joystick left or right to enter.

Move the joystick up or down to select the “Informa-

3 tion”, then move the joystick left or right to enter.

4 Press the Menu button to exit.

54

Position

Language English

Scaling Wide

Zoom/Panning

Image Lock

Miscellaneous

Move Adjust Exit

Position

Language English

Scaling Wide

Zoom/Panning

Image Lock

Miscellaneous

Move Adjust Exit

Information
Multi Control
Key Lock		Off
Move	Adjust	Exit

Horizontal Vertical

Resolution 1024 768

Frequency 48.3KHz 60Hz

Exit

Power Saver (PC mode only)

This monitor has a built-in power management system called Power Saver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. This power management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this fea- ture. See the table below for details.

Table 1. Power-saving modes

State	Normal	Power-saving Function Mode
	Operation	Standby Mode	Suspend Mode	Power-off Mode
			Position A1	Position A2
Horizontal Sync	Active	Inactive	Active	Inactive
Vertical Sync	Active	Active	Inactive	Inactive
Video	Active	Blanked	Blanked	Blanked
Power	Green	Amber Blinking	Amber Blinking	Amber Blinking
Indicator		(1 sec Interval)	(1 sec Interval)	(1 sec Interval)

Notes:

•This monitor automatically returns to normal operation when horizontal and vertical sync return.

•This occurs when moving the computer’s mouse or pressing a key on the keyboard.

•For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattend- ed for long periods.

55