Samsung HT-410HD Connectingthe Video Out to TV, Method1 When you connect to Video Out, Scart

1p~40p(410HD)-GB 7/27/04 4:58 PM Page 16

Connectingthe Video Out to TV

Method1 When you connect to Video Out		Good Quality
1 Connect the Video Out to the Video
In on the TV.
2 Set the Video Input source on your TV
to the corresponding Video output on
your Home Theater.	Video Cable	or
	(supplied)
Scart		Scart Adaptor
		(supplied)

Method 3 When you connect to DVI Video

Connect if the TV has an DVI In jack.

1 Connect the DVI Out to the DVI Input on the TV.

2 Set the Video Input source on your TV to the corresponding DVI output on your Home Theater.

Best Quality

DVI Cable

(supplied)

CONNECTIONS

If your television is equipped with a SCART input,Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO jack on the Scart Adaptor, then connect the Scart Adaptor to the SCART IN jack on your television.

Method 2 When you connect to Component Out Better Quality

Connect if the TV component input supports the resolution of over 576p(480p).

What is DVI (Digital Visual Interface)?

This device transmits DVD video signal digitally without the process of converting to analog. You can get sharper digital pictures by connecting the video to the TV using an DVI connection cable.

1 Connect the component output (PR, PB,

Y)to the component input on the TV (PR, PB, Y).

•Be sure to make the correct connections between the when you connect the component output jacks to the TV. If these are connected wrong, the screen may show red or blue, or there may be no screen at all.

2 Set the Video Input source on your TV to the corresponding Component output on your Home Theater.

Note	•	If the TV only supports a resolution of 576i(480i),
		the screen may be divided into 2 screens, or
		display nothing.

The Component input may be marked ‘DVD

input’ depending on the TV.

•If you connect the DVI and Component outputs (PR, PB, Y) at the same time, the Component output resolution changes automatically to the designated DVI resolution.

Example: If the TV connected to DVI can only support up to 576p(480p), the DVI and Component outputs are all converted to 576p(480p), even if you select the resolution switch to 1080i.

•If TV does not support HDCP (High-bandwidth Digital content protect), snow noise appears on the screen.

•Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can enhance a 576i(480i) DVD resolution output to 576p(480p)/720p/1080i.

•You do not have to make separate adjustments, since the Home Theater and TV will be automatically adjust themselves to the optimal resolution and aspect ratio if connected to DVI. (If the TV is an HDTV and has an DVI Video Input jack, output is automatically converted to the resolution of 1080i.)

•Component output will give video in ‘576p(480p)’ mode only during DVD disc playback applied with Macrovision.

•Macrovision processes scramble on analog output to prevent illegal recording. Accordingly, if you are using DVI only, it can output 576p(480p)/720P/1080i, but is limited to 576p(480p) only if you are using component.

•When both DVI connector and COMPONENT connector are connected, COMPONENT video is not displayed.

•See your TV owner's manual for more information on how to select the TV's Video Input source.

13 14