Test Tone

Use test tone to check speaker connection status or level.

To Automatically Output Test Tone

√

MAIN UNIT

1 Press SETUP button.

•“SETUP MODE” appears on the display and enters into Setup Mode.

2 Press INPUT button 4 times.

•“TEST-T AUTO” appears in the display.

3 Press SURROUND button.

•Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W .

• During test signal output, press SELECT ( ,) button to adjust the speaker output level from -10 to +10 dB by 1 step.

To Stop Test Tone

Method 1) Press INPUT button 2 times.

•“TEST-T OFF” appears on the display and test tone stops.

Method 2) Turn VOLUME CONTROL.

•“SETUP MODE OFF” appears on the display and test tone stops.

GB

To Manually Output Test Tone

 

√

1 Press SETUP button.

OPERATION

MAIN UNIT

 

•“SETUP MODE” appears on the display and enters into Setup Mode.

2 Press INPUT button 5 times.

•“TEST-T MANU” appears in the display.

3 Press SURROUND button.

•Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W will be selected in turn.

4 Press SELECT( ,)button to set the test tone as you want.

•You can adjust the speaker output level from -10 to +10dB by 1 step.

To Stop Test Tone

Method 1) Press INPUT button 1 time.

•“TEST-T OFF” appears on the display and test signal stops.

Method 2) Turn VOLUME CONTROL.

•“SETUP MODE OFF” appears on the display and test tone stops.

Test Tone Output
•F.L (Front-Left) :-10 ~ +10dB•CEN (Center) : -10 ~ +10dB•F.R (Front-Right) :-10 ~ +10dB•S.R (Surround-Right) :-10 ~ +10dB•S.L (Surround-Left):-10 ~ +10dB•S.W (Subwoofer): -10 ~ +10dB

23

24