![](/images/backgrounds/347087/347087-08x1.png)
Connecting External Component
Connecting the FM and AM Antennas | GB |
|
If AM reception is poor, connect an outdoor AM antenna(not supplied).
Connecting Audio ComponentBefore moving or installing the product, be sure to turn off the power and disconnect the power cord.
| AM Loop Antenna |
| (supplied) |
| FM Antenna (supplied) |
CD Player | Snap the tabs on the loop into the |
| |
| slots of the base to assemble the |
| AM loop antenna. |
CONNECTIONS
FM antenna connection | AM antenna connection |
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
![](/images/backgrounds/347087/347087-08xi3.png)
2.If reception is poor, connect an outdoor single vinyl- covered wire to the AM terminal.
(Keep the AM loop antenna connected).COOLING FAN | The cooling fan dissipates the heat generated inside the unit so that the unit can | |
be operated normally. The cooling fan is activated automatically to supply cool air | ||
| ||
| to the unit. | |
| Please observe the following cautions for your safety. | |
| • Make sure the unit is | |
| unit could rise and may damage it. | |
| • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are | |
| covered with a newspaper or cloth, heat may build up inside the unit and fire may result.) |
13 | 14 |