Test Tone

Use test tone to check the speaker connection status or level.

To Automatically Output Test Tone

√

REMOTE CONTROL

Press TEST TONE button.

•Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W.

•During test tone output, press …† button to adjust the speaker output level from -10 to +10 dB by 1 step.

To Stop Test Tone

• Press TEST TONE button again.

√

MAIN UNIT

1 Press SETUP button.

•“SETUP MODE” appears on the display and enters into Setup Mode.

2 Press FUNCTION button 5 times.

•“TEST-T AUTO” appears in the display.

3 Press SURROUND button.

• Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W .

• During test signal output, press SELECT ( ,) button to adjust the speaker output level from -10 to +10 dB by 1 step.

To Stop Test Tone

Press SETUP button 1 time.

•“SETUP MODE OFF” appears on the display and test tone stops.

GB

To Manually Output Test Tone

 

 

√

 

OPERATION

 

 

 

 

1 Press SETUP button.

 

MAIN UNIT

 

 

 

•“SETUP MODE” appears on the display and the unit enters into Setup Mode.

2 Press FUNCTION button 6 times.

•“TEST-T MANU” appears in the display.

3 Press SURROUND button.

•Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W will be selected in turn.

4 Press SELECT(

,

) button to set the test tone as you

 

 

want.

 

 

•You can adjust the speaker output level from -10 to +10dB by 1 step.

•The sound gets quieter at -10dB and louder at +10dB.

To Stop Test Tone

Press SETUP button 1 time.

•“SETUP MODE OFF” appears on the display and test signal stops.

Test Tone Output
•F.L (Front-Left) :-10 ~ +10dB•CEN (Center) : -10 ~ +10dB•F.R (Front-Right) :-10 ~ +10dB•S.R (Surround-Right) :-10 ~ +10dB•S.L (Surround-Left):-10 ~ +10dB•S.W (Subwoofer): -10 ~ +10dB

26

27