Connecting External Components
Connecting Audio Component
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the FM and AM Antennas GB
If AM reception is poor, connect an outdoor AM antenna(not supplied).
AM Loop Antenna (supplied)
FM Antenna (supplied)
CONNECTIONS
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
| FM antenna connection | AM antenna connection | ||
| 1. Connect the FM antenna supplied to the FM | 1. Connect the AM loop antenna supplied to the AM | ||
| 75ΩCOAXIAL terminal as a temporary measure. | and terminals. | ||
| 2. Slowly move the antenna wire around until you find | 2. If reception is poor, connect an outdoor single vinyl- | ||
a location where reception is good, then fasten it to | covered wire to the AM terminal. | ||
| a wall or other rigid surface. | (Keep the AM loop antenna connected). | ||
| COOLING FAN | The cooling fan dissipates the heat generated inside the unit so that the unit can | ||
be operated normally. The cooling fan is activated automatically to supply cool air | |||
| |||
| to the unit. |
| |
| Please observe the following cautions for your safety. | ||
| • Make sure the unit is | ||
| rise and cause damage to it. |
| |
| • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are | ||
| covered with a newspaper or cloth, heat may build up inside the unit and fire may result.) | ||
14 | 15 |