Setup

Before Starting (Initial Settings)

1.Turn on your TV after connecting the product. (When the product is connected to TV for the first time, the product will turn on automatically and display the Initial Settings screen.)

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English

Français

Deutsch

Español

Italiano

Nederlands

> Move sSelect

2.Press the ▲▼ buttons to select the desired language, then press the ENTER button.

3.Press the ENTER button to Start.

Initial Settings

TV Aspect, Musical Room Calibration and Network will be set.

Each setting may be changed later under "Settings"

Start

a Previous " Select

4.Press the ▲▼ buttons to select the desired TV aspect ratio, then press the ENTER button. (See page 31)

The Musical Room Calibration screen appears.

5.Plug the ASC microphone into the ASC IN jack on the product. (See page 35)6.Press the ENTER button to Start.

Initial Settings I Musical Room Calibration

Preparing...

dSkip

Setting the Musical Room Calibration function takes about 3 minutes.

03

7. Press the ◄► buttons to select the desired

Setup

Network Settings : Wired, Wireless or PBC

 

(WPS), and then press the ENTER button.

 

If you do not know your Network Settings,

 

press the BLUE (D) button on your remote

 

instead to skip Network Settings here, finish the

 

Initial Settings, and go to the Home menu. If

 

you selected a Network Setting, go to pages

 

39~42 for more information about the Network

 

settings. When done, go to Step 8.

 

Initial Settings I Network

Network Setting is needed to use various Internet services.

Choose the primary method for connecting to network.

Wired : Set the network by using Ethernet cable.

Please make sure that Ethernet cable is connected.

Wired

Wireless

PBC (WPS)

a Previous d Skip <Move " Select

8.Press the OK button.

The home menu appears. (For more information about home menu, please see page 30)

•Home Menu

Please activate Internet@TVinternet radio serviceYou Tube to enjoy a variety of Internet Services.

No Disc a Change Device

dView Devices " Enter

✎NOTE

When the product is connected to TV for the first time, product will turn on automatically. This is not a malfunction.

The home menu will not appear if you do not configure the initial settings.

If you press the BLUE (D) button during the Musical Room Calibration/Network setup, you can access the home menu even if the network setup is not completed yet.

When you return to the home menu, the full screen mode is cancelled automatically.

English 29