Connecting The Speakers

1.Press down the terminal tab on the back of the speaker.

2. Connect the black wire to the black terminal(-), connect the wire wearing a colored band to the red(+) terminal, and release the tab.

3.Connect the connecting plugs to the back of the Subwoofer bymatching the colours of the speaker plugs to the speaker jacks.

4. With the product turned off, insert the TX card into the TX Card Connection(WIRELESS) on the back of the Subwoofer.

•Hold the TX card so that the label "WIRELESS" faces leftward and insert the card into the port.

•The TX card enables communication between the product and thewireless receiver module.

5. Connect the left and right surround speakers to the wireless receiver module.

6.

Plug the power cord of the wireless receiver module in the wall outlet.

 

7.

Turn on the product. The product and wireless receiver module will

 

 

now communicate with each other and you will hear sound from the

TX card

 

Surround speakers.

 

 

Attaching the Toroidal Ferrite Core to the Speaker Cable

1.Open the smaller ferrite core by pulling upthe tab.

2. Arrange up the speaker cables that are connected to the FRONT L (+,-) terminal before making 3 loops of them.

3. Attach the ferrite core to the arranged cables and press to close it until you hear a click.

• Insert the ferrite core as close to the sub woofer as possible.

4. Follow steps 1 through 3 above and insert the ferrite core to each speaker cable that is connected to any of the FRONT R (+,-) and

CENTER (+,-) terminals of the sub woofer.

<SWA-5000>

5.Make 3 loops of the speaker cables that are connected to the REAR L and REAR R terminals of the wireless receiver (SWA- 5000) and insert the smaller ferrite core in the same way as step 3 above.

Connections 02

English 27

HT-C9950W_ELS_0914.indd 27

2010-09-14 ￿￿ 6:54:53