How to Link the Wireless Transmitter
with the Main Unit
1.Turn off your Home Cinema.
2.Press the 4, 7, 6, 3 buttons on the remote control in order.
•The Power LED will blink once.
3.Connect the iPod/iPhone to the Wireless transmitter.
LINK
STANDBY
CHARGE
4.Turn on the iPod/iPhone. Press the "ID SET" button on the back of the Wireless transmitter for 5 seconds. The link light on the wireless transmitter will blink fast.
5.Turn on your product.
•To listen to music from iPod/iPhone over the product, press the FUNC. button on the product to select "iPod" mode.
•After you select "iPod" mode, turn the volume of the product down to avoid hearing damage.
•You can control the speaker volume of iPod/ iPhone with a volume wheel or a volume bar.
•When iPod/iPhone is stopped or in a power saving mode, a Wireless transmitter is turned to the Sleep Mode.
When iPod/iPhone is turned to the Deep
Sleep Mode, the Wireless transmitter is off.
Operation status of the wireless transmitter's LED
LINK |
|
| |
| STANDBY |
| |
| LINK |
| |
| STANDBY |
| |
| CH |
| |
| ARGE |
| |
| Function | ||
Display | LINK | STANDBY | |
| |||
| (Blue LED) | (Red LED) | |
| Pairing |
| |
LED ON | successfully | STANDBY | |
| completed |
| |
LED BLINK | Processing iPod/ | LOW BATTERY | |
(Long blink) | iPhone | ||
| |||
LED BLINK | Processing | Pairing failed | |
(Short blink) | pairing | ||
|
!CAUTION
If you use the main unit nearby a wireless device such as a laptop computer, an AP, or Wifi, any unstable operation error can happen.
Do not pairing the
The transmission distance from the product to the wireless transmitter is about 5m, but may vary depending on your operation environment.
The audio signal may be weakened or even lost where there exists an obstacle such as a wall or partition between the product and wireless transmitter or if you move around
carrying the wireless transmitter.
Functions Basic 04
English 63