Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
•If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input selection” section.
•Most DVD players are connected through RCA SOCKETS. Use a RCA video cable to connect video input. For enabling audio, use a component audio cable as illustrated below. When done, switch to
•You may also connect through the SCART . Use a SCART cable as shown below.
HDMI cable
HDMI
Input
SCART cable
RCA cable
REAR VIEW
sockets
Note: These three methods of connection perform the same function but in different levels of quality. It is not necessary to connect by all three methods.
- 13 - 
25.06.2008, 09:06 |
