![](/images/new-backgrounds/1201411/20141175x1.webp)
PC Mode Menu System
See the “Connecting the LCD TV to a PC” section for connecting a PC to the TV set.
For switching to PC source, press the AV button on your remote control and select PC input.
Note that PC mode menu settings are available only while the TV is in PC source.
Sound Menu
The items in this menu are described at “Sound Menu” section explained in the “Menu System” section.
Feature Menu
Feature menu settings are identical to the settings explained in “Feature Menu” section in the “Menu System” section.
PC Picture Menu
Select PC Picture menu by pressing / button and then press button. PC Picture menu appears on the screen. Brightness, Contrast and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu in “Menu System” part.
Geometry Menu
Select the fourth icon by pressing / button and then press button. Geometry menu appears on the screen:
GEOMETRY |
|
H Position |
|
V Position |
|
Clock |
|
Phase |
|
Auto Adjustment |
|
Back : Menu | Exit : TV |
H. (Horizontal) Position
This item shifts the image horizontally to right hand side or left hand side of the screen.
Select H. position by pressing /
button. Use / button to adjust the value.
V. (Vertical) Position
This item shifts the image vertically towards the top or bottom of the screen.
Select V. position by pressing /
button. Use / button to adjust the value.
Clock
Clock adjustments correct interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Select Clock by pressing /
button. Use /
button to adjust the value.
Phase
Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case, you can use this item to get a clear picture by trial and error method.
Select Phase by pressing /
button. Use
/ button to adjust the value.
Auto Adjustment
If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically.
Select Auto Adjustment item by using /
buttons. Press or OK button.
Warning: Auto position adjustment recommended to be done with the full screen image for the proper adjustment.
- 37 -
25.06.2008, 09:07 |