Setup

Initial Settings

1.Turn on your TV after connecting the product. When you connect and turn on the product to a TV for the first time, the Initial Settings screen appears.

Initial Settings On-Screen Language

Select a language for the on-screen displays.

Български

 

Hrvatski

 

Čeština

 

 

 

 

 

 

Dansk

Nederlands

 

English

 

 

 

 

 

 

Eesti

 

Suomi

 

Français

 

 

 

 

 

 

Deutsch

 

Ελληνικά

 

Magyar

 

 

 

 

 

 

Indonesia

 

Italiano

 

￿￿￿

 

m Move " Enter

2.Press the ▲▼◄► buttons to select the desired language, and then press the ENTER button.

3.Press the ENTER button to select Start.

4.Press the ▲▼ buttons to select the desired TV Aspect Ratio, and then press the ENTER button. (See page 31)

Musical Auto Calibration screen will be displayed.

5.Plug the ASC microphone into the ASC IN jack on the product. (See page 35)

6.Press the ENTER button to select Start button. Setting the Musical Auto Calibration function takes about 3 minutes.

7.Press the ▲▼ buttons to select the desired Network Settings : Wired, Wireless (General), WPS(PBC) or One Foot Connection, and then press the ENTER button. If you do not know the details of your Network Settings, press the BLUE (D) button on your remote instead to skip Network Settings here, finish the Initial Settings, and go to the Home menu.

If you selected a Network Settings, go to pages 38~41 for more information about the Network settings. When done, go to Step 8.

8.The Home menu appears. (For more information about the Home menu, please see page 29.)

•Home Menu

My Contents

Videos

Photos

Music

Function

My Devices

Internet

Settings

d WPS(PBC)

✎NOTE

The Home menu will not appear if you do not configure the initial settings except as noted below.

If you press the BLUE (D) button during the Musical Auto Calibration/network setup, you can access the Home menu even if the network setup is not completed yet.

If you want to display the Initial Setting screen again to make changes, select the Initial Settings. (See page 42)

If you use an HDMI cable to connect the product to an Anynet+ (HDMI-CEC)- compliant Samsung TV and 1.) You have set the Anynet+ (HDMI-CEC) feature to On in both the TV and the product and 2.) You have set the TV to a language supported by the product, the product will select that language as the preferred language automatically.

If you leave the product in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off.

28 English

HT-D5500_ELS_1226.indd 28

2011-12-26 ￿￿ 1:24:07