Samsung HT-D6750W Connections, Speaker Components, Installing the Speakers on the Tallboy Stand, CAUTION, !CAUTION, 18 English, Follow this steps to install other speaker

Connections

Speaker Components

(L) (R)

SWA-5000

STAND	SUBWOOFER		TX Card
FRONT/FRONT TOP
CENTRE		Wireless Receiver Module	Speaker Cable (2EA)
SCREW (4x20): 16EA
(L)	(R)

SCREW (5x15): 6EA

SPEAKER CABLE

SURROUND STAND BASE

Installing the Speakers on the Tallboy Stand

1.Turn the Stand Base upside-down and connect it to the Stand.

2.Insert small screws (4x20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.

!CAUTION

When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm)

3.Insert the large screw (5x15, For connecting Stand & Stand Base) clockwise into the hole on the rear of the stand using a screwdriver.

4.Connect the upper Speaker to the assembled Stand.

5.Insert another large screw (5x15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

6.This is the appearance after the speaker is installed.Follow this steps to install other speaker.18 English

12

Stand Base

Stand

34

Speaker

Stand

56

or

HT-D6750W_ELS_1227.indd 18 2011-12-27 ￿￿ 9:24:59