Samsung HT-D6750W Setup, User EQ, Musical Auto Calibration, NOTE, ✎NOTE, 34 English, Measurement, Musical Auto Calibration Mode, 1.Plug the ASC microphone into the ASC IN jack

Setup

Musical Auto Calibration

By setting the Musical Auto Calibration (MAC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-channel sound field optimized for your environment.

5

ASC IN

R/FTR

ASC

microphone

L/FTL

Musical Auto Calibration Mode

You will hear either the Musical Auto Calibration mode or the User Speaker Settings.

•Off: You will hear sound in the the Speaker Setting value.•On: You will hear sound in the Musical Auto Calibration mode.Measurement1.Plug the ASC microphone into the ASC IN jack.

2.Place the ASC microphone at the listening position.

•Musical Auto Calibration will be automatically set up in the following sequence:

Front L  Center  Front R  Surround R  Front Top R  Front Top L  Surround L  Subwoofer

•Press the RETURN button to cancel the Musical Auto Calibration Setting.

✎NOTE

Setting the Musical Auto Calibration function takes about 3 minutes.

The Musical Auto Calibration setup can be made when there is no disc in the product.

If the ASC microphone is disconnected during the Musical Auto Calibration setup, the setup will be cancelled.

When the Musical Auto Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode will not work.

If the product is connected to external devices or other components (such as an iPod, AUX, D. IN), the Musical Auto Calibration Setup may not work properly.

Noise may result in wrong measurement. So please proceed with the measurement in a quiet room to obtain proper calibration.

Place the microphone on the main listening position.Nothing should get in the way between speakers and microphone.Note that the test tone of the speaker may be loud when conducting the test.

Do not place the microphone behind the furniture or too close to the wall. Otherwise, it can produce an incorrect test result.

User EQYou can configure the equalizer settings manually to your preference.

Settings

Display					User EQ
Audio	0		0	0		0	0	0	0
	6
Network	·
	··
System	·
	0·
Language	·
	·
Security	·
	·
	·
General	-6
	250Hz		600Hz	1kHz		3kHz	6kHz	10kHz	15kHz
Support
		A	Reset	> Adjust			< Move	' Return

34 English

HT-D6750W_ELS_1227.indd 34 2011-12-27 ￿￿ 9:25:36