Attaching the Toroidal Ferrite Core to the Speaker Cables of the Subwoofer

If you attach a Toroidal ferrite core to the Speaker Cables of the subwoofer, it will help to prevent RF interference from radio signals.

1. Pull the fixing tab of the Toroidal ferrite core to open it.2. Make a loop once in the Speaker Cables.

3. Attach the Toroidal ferrite core to the Speaker Cables of the Subwoofer as the figure shows and press it until it clicks.

•Make another ferrite core beside the first one that followed same steps 1 through 3.

•Insert the ferrite core as close to the subwoofer as possible.

Speaker Components

Connections 02

(L) (R)

SW

SUBWOOFER

FRONT

SPEAKER CABLE

Position of the productPlace it on a stand or cabinet shelf, or under the TV stand.Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 2~2.4m

For 55" TV's 3.5~4m
Front Speakers ei

Place these speakers in front of your listening position, facing inwards (about 45°)

toward you. Place the speakers so that their tweeters will be at the same height as

 

your ear.
Subwoofer g

The position of the subwoofer is not so critical. Place it anywhere you like.

!CAUTION

Do not let children play with or near the speakers. They could get hurt if a speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.

Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.

Do not hang the subwoofer on the wall through the duct (hole).

✎NOTE

If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field generated by the speaker. If this occurs, place the speaker away from your TV set.

English 21

HT-D7200_ELS_1227.indd 21

2011-12-27 ￿￿ 3:27:58