Setup
3.Press the WPS(PBC) button on your router within two minutes. Your product displays the Network Selection Screen, and automatically acquires all the network settings values it needs and connects to your network. When it is done, it displays an OK button. Press the ENTER button on your remote.
One Foot ConnectionYou can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps:
1.Press the ▲▼ buttons to select One Foot Connection.Settings
Network Settings
Display
Select a network connection type.
Audio
Network
Wired
System
Wireless
Language(General)
Connect to your wireless network automatically if your
Security WPS(PBC) Wireless Router supports One Foot Connection. Select this
General One Foot connection type after placing the Wireless Router within 10 inches(25cm) of Samsung Wireless LAN Adapter.
Support Connection
> Move " Enter ' Return
2.Press the ENTER button.
3.Place the Samsung Wireless Router within 25 cm (10 inches) of Samsung Wireless LAN Adapter to connect.
4.Wait until the connection is automatically established.Network Status
Check whether a connection to the network and the Internet have been established.
Settings |
| Network Status |
|
Display |
| MAC Address | XX:XX:XX:XX:XX:XX |
Audio |
| IP Address | 0.0.0.0 |
Network | KT_WLAN | Subnet Mask | 0.0.0.0 |
Gateway | 0.0.0.0 | ||
System |
| DNS Server | 0.0.0.0 |
Internet is connected successfully.
Language
If you have a problem using any Internet services, contact your Internet service
Securityprovider.
General
SupportNetwork Settings | IP Settings | Retry | OK |
< Move " Enter ' Return
40 EnglishBD-LIVE Internet Connection
Set to allow or prohibit an Internet connection when you use the
•Allow (Valid Only) : The Internet connection is allowed only for
✎NOTE
What is a valid certificate?When the product uses
The Internet connection may be restricted while you are using
System
Initial Settings
By using the Initial Settings function, you can set the language, Network Settings, etc.
For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See page 28)
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature.
To operate this function, connect this product to a Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this product using a Samsung TV remote control and start disc playback simply by pressing the PLAY (►) button on the TV’s remote control.
For more information, please see the TV user manual.•Off : Anynet+ functions will not work.•On : Anynet+ functions will work.