Symptom

Check/Remedy

• Disc is rotating but no

Is the TV power on?

picture is produced.

Are the video cables connected properly?

• Picture quality is poor and

Is the disc dirty or damaged?

A poorly manufactured disc may not be playable.

picture is shaking.

 

Is the remote control being operated within its operation range of

The remote control does not

angle and distance?

 

 

 

 

work.

Are the batteries exhausted?

 

 

 

 

Have you selected the mode(TV/DVD) functions of the remote

 

control (TV or DVD) correctly?

 

 

 

 

 

 

 

 

 

 

Audio language and

Audio language and subtitles will not work for DVDs not containing

subtitles do not work.

them. And depending on the disc, they may work differently.

 

 

 

 

 

 

 

 

Menu screen does not appear even

Are you using a disc that does not contain menus?

 

when the menu function is selected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Aspect ratio cannot be

You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX

changed.

mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3

ratio only. Refer to the DVD disc jacket and then select the

 

 

appropriate function.

 

 

 

 

 

 

 

 

 

 

 

 

Can't receive radio

Is the antenna connected properly?

 

 

 

 

broadcast.

If the antenna's input signal is weak, install an external FM

antenna in an area with good reception.

 

 

 

 

 

 

 

 

 

• The main unit is not working.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Turn off the power and hold the

button on the main unit for

(Example: The power goes out or

longer than 5 seconds.

 

 

 

 

strange noise is heard.)

 

 

 

 

 

 

 

 

 

 

 

• The DVD player is not

Using the RESET function will erase all stored settings.

 

working normally.

Do not use this unless necessary.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The password for rating

While the player is in the stop mode, hold the main unit's

button for

longer than 5 seconds. “INITIALIZE” appears on the display and all

level has been forgotten.

settings will return to the default values.

 

Press the POWER button.

 

 

 

 

 

Using the RESET function will erase all stored settings.

 

 

Do not use this unless necessary.

 

 

 

 

MISCELLANEOUS

70

Page 71
Image 71
Samsung HT-DB390 instruction manual Picture is produced, Remote control does not