Plug the power cord into, AC power supply | Samsung HT-DB390

Before Using Your DVD Player

Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using.

1	Plug the power cord into
	the AC power supply.

4 Press TV/VIDEO button to select VIDEO mode.

2 Press the MODE button so that the TV indicator on the remote control flashes.

TV DVD RECEIVER

Press the MODE button so

5 that the DVD RECEIVER indicator on the remote control flashes.

TV DVD RECEIVER

3

6

Press the POWER button to turn on the TV.

CONNECTIONS

Press DVD button to select

DVD/CD mode.

To Operate the TV and DVD Player with a Single Remote Control

Press MODE button.

•Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately.

•You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.

•Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.

•By default, the remote control is set to work with Samsung TVs. See page 65 for more information on the operation of the remote control.

21

22

Image 12

Samsung HT-DB390 instruction manual Plug the power cord into, AC power supply, Press the Power button to turn on the TV

Contents

Financial Drive, Mississauga, Ontario, Canada L5N 6R3 TEL AH68-01445S Safety Warnings Precautions Class 1 Laser Product Contents Copy Protection Disc Size Max. Playing Time Description Front Panel Remove the battery Insert two 1.5V AAA Replace the batteryInsert Remote Batteries Cover Connecting the Speakers Position of the DVD Player Selecting the Listening PositionFront Speakers L R Center Speaker C Rear Speakers LS RS Connecting Wireless Rear Speakers Turning off the Wireless Amp and Mood LightTurning Off the Mood Light Turn on the main unit TV Broadcast System Composite Video Good QualityVideo Better Quality Component Video Best Quality Connecting an External Digital Component Connecting an External Analog ComponentPress AUX on the remote control to select AUX 1 or AUX Please observe the following cautions for your safety Temporary measureIs good, then fasten it to a wall or other rigid surface Terminal. Keep the AM loop antenna connected Plug the power cord into AC power supplyPress the Power button to turn on the TV Press DVD button to select DVD/CD mode Disc Playback MP3 -CD Playback Jpeg Disc Playback Displaying Disc Information To rotate the image Fast/Slow Playback Skipping Scenes/SongsPress and hold Briefly press Repeat Playback Press Repeat buttonPress Info button twice Press Cursor 2 button to move to Press Enter Angle Function Zoom FunctionButton Press Enter button 1Press Info button twice 1Press Info buttonPress the numeric buttons Using Disc Menu Using the Title MenuPress Menu button to exit the setup screen Stop mode, press Menu button Setting the Language ‘Setup’ and thenPress Cursor Button to move to Setting TV Screen type Adjusting the TV Aspect Ratio Screen Size43LB 43PS Setting Parental Controls Rating Level Enter the password Then press Enter button Setting the Password Press Menu button Setting the Wallpaper Jpeg DVD VCD Stop mode Press Menu buttonTo Change the Wallpaper Press OPEN/CLOSE Setting the Speaker Mode Setting the Test ToneSpeaker Setup, press the Enter button again Press Test Tone button Setting the Delay Time Press Return button to return to the previous level Setting the Audio Quality Press Sound Edit button and then press Cursor‘Audio’ and then press Enter button Setting the DRC Dynamic Range Compression Auto Sound Calibration Setup Press ASC buttonTo Turn On or Off Sound Logo Live Surround Mode Plug the headphones into the headphone jackMagic Headphone Function Press SUPER5.1 button Dolby Pro Logic II Mode Press PL II Mode buttonButtons to select the mode Dolby Pro Logic II Effect Presetting Stations Listening to Radio To confirm the sleep timer setting, press Sleep button Convenient FunctionsPress Sleep button Press Dimmer button When operating a TV with the remote control Press the Mode button to make the TVIndicator on the remote control flash Before Calling for Service Symptom Check/Remedy Specifications Handling discs Samsung Limited Warranty