Disc Playback

MP3 -CD Playback

Data CDs (CD-R, CD-RW) encoded in MP3 format can be played.

1 Press OPEN/CLOSE button to open the disc tray.

2

Load a disc.

Place a disc gently into the tray with the disc’s label

facing up.

3 Press OPEN/CLOSE button to close the disc tray.

DVD VCD CD

Playback starts automatically.

Note

Depending on the content of the disc, the initial screen may appear different.

Press the

1 OPEN/CLOSE button to open the disc tray, and then load the MP3 disc.

The MP3 menu screen will appear and playback will start.

Depending on the MP3 disc, the appearance of the menu may be different.

To change the album,

3 use to select another album in Stop mode, and then press the ENTER button.

To select another album and track, repeat Steps 2 and 3 above.

2 to select the album, and

then press the ENTER button.In Stop mode, use

4 Press the STOP button to stop playback.

OPERATION

To stop playback,

press STOP during playback.

If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.

If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)

If pressed twice, “STOP” is displayed, and if

PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.

To temporarily pause playback, press PLAY/PAUSE during playback.

To resume playback, press PLAY/PAUSE ( ) button again.

Note

Depending on the recording mode, some MP3-CDs may not play.

 

 

Table of contents of a MP3-CD varies depending on the MP3 track format

 

 

recorded on the disc.

23

24

Page 13
Image 13
Samsung HT-DB390 instruction manual Disc Playback MP3 -CD Playback