Samsung 20051111115925328, HT-DS665T Connecting the Video Out to TV, Selecting Resolution

Connecting the Video Out to TV

Selecting Resolution

You can adjust the resolution switch to set the HDMI and component (PR, PB, Y) output resolution to 480p/720p/1080i.

Example: If the TV supports resolution up to 480p

1 Set the resolution switch to 480p.

•A 480p video signal is output through the HDMI and

component outputs (PR, PB, Y).

Caution

•	If you connect the HDMI and Component outputs (PR, PB, Y) at the same time, Component output resolution changes
	automatically to the designated HDMI resolution.
	Note
•	If copy protection is in place, output resolution is automatically converted to 480p when you play the DVD,
	even if you set the resolution to 720p or 1080i.

DCDi (Directional Correlational Deinterlacing) Function

Converts the interlace signal to progressive to prevent flickering and to remove distortion or noise on the edge of screen.

Press and hold DCDi button on the remote control for over 3 seconds.

• Each time the button is pressed, the selection alternates between

DCDi ON and DCDi OFF.

21