Setup
Audio
DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
•You can select either Full, 6/8, 4/8, 2/8, off.
Settings
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz
a Reset > Adjust < Move ' Return
mMove " Select ' Return
AUDIO SYNC
Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to match the video
•You can set the audio delay time between 0 mSec and 300 mSec. Set it to the optimal status.
Audio Return Ch.
You can enjoy TV sound from the Home Cinema speakers by using just one HDMI cable.
•Off : Turn the Audio Return Channel function off.
•Auto : Listen to TV sound from the Home Cinema speakers if your TV is compatible with the Audio Return Channel function.
Speaker Selection
The audio signals transmitted over the HDMI Cable can be changed Home Theater/TV Speaker.
•Home Theater : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only.
•TV Speaker : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
✎NOTE
The default setting of this function is Home Theater .
When TV Selection is set to TV Speaker, DSP EQ/P.BASS/GIGA/S.VOL doesn't work.
With Speaker Selection set to 'TV Speaker', the volume can be adjusted only using the TV remote control.
User EQ
You can configure the equalizer settings manually to your preference.
✎NOTE
When Anynet+
Using an ARC (Audio Return Channel)- uncertified HDMI cable may cause a problem in compatibility.
ARC function is only available if an ARC- compliant TV is connected.
Karaoke Scoring
Karaoke score display can be toggled On or Off.
• Off : Turns off the karaoke score display.
• On : After the singing, the score is displayed on the screen.
✎NOTE
In D.IN/USB/DIVX/MP3/WMA state,karaoke scoring does not work.
System
Initial Settings
By using the Initial Settings, you can set the language and TV aspect .
✎NOTE
If an HDMI cable is connected to the product, the TV aspect does not appear and it is set to 16:9 Wide automatically.
