Samsung HT-H4500R/XU, HT-H4500R/EN, HT-H4500R/ZF Connecting The Speakers, HT-H4550R, Speaker Cable

HT-H4550R

(L) (R)	(L) (R)	SCREW (5x15): 16EA
	SPEAKER CABLE

FRONT / SURROUND STAND STAND BASE CENTRE SUBWOOFER

Installing the Speakers on the Tallboy Stand * HT-H4550R only - Front/Surround Speakers

1.	Turn the Stand Base upside-down and connect it to the Stand.	1 Stand Base	2
2.	Use the driver to combine the screws on the 3 marked holes.
		Stand

03 Connections

3.Straighten a supplied speaker wire to the gravity direction and put in the hole on the centre of Stand Base.

4.Connect the upper Speaker to the assembled Stand.

5.Insert a screw clockwise into the hole on the rear of the speaker using a screwdriver.

And then connect a speaker cable.

6.This is the appearance after the speaker is installed.

Follow this steps to install other speaker.

34

Speaker

Stand

56

Connecting The Speakers

1.Match each speaker cable bundle to the correct speaker by matching the colour

2.	coded plug on each bundle to the coloured sticker on the bottom of each speaker.
	To attach speaker wire to each speaker:
	a. Press down the red tab on the back of the speaker, insert the red wire, and then
	release the tab.
	b. Press down the black tab on the back of the speaker, insert the black wire, and	Black	Red
3.	then release the tab.
	Connect the speaker wire plugs from each speaker to the back of the product by
	matching the colours of the speaker plugs to the colours of the speaker jacks.

English 13