Samsung HT-Q100 AV SYNC Setup, Listening to Radio, Remote Control Unit, Main Unit, Operation

AV SYNC Setup

Video may look slower than the audio if it is connected to a digital TV.

If this occurs, adjust the audio delay time to to match the video.

Press Cursor , buttons 1 Press the MENU button. 2 to move to ‘Audio’ and then

press ENTER button.

•Setup menu appears.

Listening to Radio

Remote Control Unit

1Press the TUNER button to select the FM band.

ENG

2 Tune in to the desired station.

MOVE ENTER EXIT MOVE ENTER EXIT

Main Unit

Automatic Tuning 1

Automatic Tuning 2

Manual Tuning

When is pressed, a preset broadcast station is selected.

Press and hold TUNING/CH to automatically search for active broadcasting stations.

Briefly press TUNING/CH to increase or decrease the frequency incrementally.

3Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTER button.

Press Cursor , buttons

4 to select the AV-SYNC Delay Time and then press the ENTER button.

•You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

1Press the Function button to select the FM band.

2 Select a broadcast station.

	Press the STOP (		)
Automatic Tuning 1
	button to select
PRESET and then press
button to select the preset station.
	Press the STOP (	)
Automatic Tuning 2
	button to selec "MANUAL"

and then press and hold button to automatically search the band.

RADIO

MOVE ENTER RETURN EXIT MOVE SELECT RETURN EXIT

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or higher frequency.

OPERATION

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

•Each time the button is pressed, the sound switches between "STEREO" and "MONO".

•In a poor reception area, select MONO for a clear, interference-free broadcast.

53 54