Installing the DVD player
1 | Separate the rear cover(A). | (A) |
|
2 Remove the 1 screw of the cover(B).
(B)
3 Put the speaker cable connected to the Speaker OUT port into the left groove.
4 Put the cables connected to the Video OUT, Component OUT and Audio IN ports into the right groove.
5 Fasten the 1 screw on the cover(B).
6 Close the rear cover(A).
Connecting the Video Out to TV | ENG |
|
Choose one of the three methods for connecting to a TV.
METHOD2 | METHOD 3 | METHOD 1 |
| (supplied) | |
|
|
TV
METHOD 1 Composite Video ....... (Good Quality)
-Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your TV.
METHOD 2 Component ....... (Better Quality)
-If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the side panel of the system to the corresponding jacks on your TV.
METHOD 3 HDMI ....... (Best Quality)
- Connect the HDMI out to the HDMI input on your TV.
Note 
• This product operates in Progressive scan mode(480p Only ) for Component Output.
• If the TV only supports a resolution of 576i(480i), the screen may be divided into 2 screens, or dis- play nothing.
• After making the video connection, set the Video input source on your TV to match the corre- sponding Video output (HDMI, Component or Composite) on your Home theater. See your TV owner's manual for more information on how to select the TV's Video Input source.
15 | 16 |
