Before Using Your Home Theater

Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using.

To Operate the TV and DVD Player with a Single Remote Control

GB

1

Plug the main unit's power

cord into the AC power

supply.

4 Press TV/VIDEO button to select VIDEO mode on your TV.

VIDEO

2

5

Press TV button to set the remote to TV mode.

Press DVD RECEIVER button to switch to DVD RECEIVER mode.

3 Press the POWER button to turn on your Samsung TV with this remote.

Press FUNCTION button on

6 the main unit or DVD button

on the remote to enable DVD/CD playback.

OPERATION

Selecting the Video Format

Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.

• By default, the video format is set to "PAL".

• "NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".

19

• Each country has a different video format standard.

• For normal playback, the video format of the disc must be the same as the video

format of your TV.

 

Note

•Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.

•By default, the remote control is set to work with Samsung TVs.

See page 57 for more information about remote control operation with other manufacturer's TVs.

20