Installing the DVD player | Connecting the Video Out to TV | ||
|
|
| Choose one of the three methods for connecting to a TV. |
1 | Separate the rear cover(A). | cover(A) |
|
|
|
2 Remove the 1 screw of the cover(B).
3 |
| METHOD2 | METHOD 3 | METHOD 1 | |
| cover(B) | (supplied) | |||
|
| ||||
Put the speaker cable connected to the |
|
| |||
|
|
| |||
| Speaker OUT port into the left groove. |
|
|
| |
| Put the cables connected to the Video OUT, |
|
|
| |
| Component OUT and Audio IN ports into |
|
| TV | |
4 the right groove. |
|
|
| ||
5 |
| METHOD 1 Composite Video ....... (Good Quality) |
| ||
Fasten the 1 screw on the cover(B). | - Connect the supplied video cable from the VIDEO OUT jack on the side panel of the system | ||||
| |||||
| to the VIDEO IN jack on your TV. |
|
| ||
|
|
|
| ||
|
| METHOD 2 Component ....... (Better Quality) |
| ||
|
| - If your television is equipped with Component Video inputs, connect a component video cable | |||
6 Close the rear cover(A). | (not supplied) from the Pr, Pb and Y jacks on the side panel of the system to the corresponding | ||||
jacks on your TV. |
|
| |||
METHOD 3 HDMI ....... (Best Quality) |
|
- Connect the HDMI out to the HDMI input on your TV.
Note • This product operates in Interlaced scan mode (576i) for component output.
GB
CONNECTIONS
13 | 14 |