Speaker Installation
Installing the DVD player | ENG |
How to Install the Speaker and the Stand
1 | 2 | 1 Turn the stand upside down and mount it on the stand | |
STAND |
| ||
BASE |
|
| base. |
STAND |
| 2 | Tighten 4 screws on the bottom side of the stand base. |
|
|
| |
|
| 3 | Place the stand on the floor and tighten 2 screws on the |
3 | 4 |
| back of the stand. |
| SPEAKER | 4 |
|
|
| Mount the speaker on the stand. | |
| STAND | 5 Tighten 2 screws on the back of the speaker. | |
|
| 6 This is the successfully assembled speaker. | |
1
2
4
3
5
STAND 1
STAND BASE
2
3
4
BACK COVER
5
6
Mount the stand on the stand base and tighten 4
screws on the bottom side of the stand base.
Loosen 2 screws at the bottom of the back cover.
Detach the back cover by lifting it up.
Secure the main unit by aligning 4 protruding points on the back of the main unit with the fixing holes on the stand.
Tighten 2 screws in the middle of the stand.
Open a Toroidal Ferrite Core by pulling it upward. Wrap it around of the system connection cable so it will be next to the DVD Player. Close it back by pressing it all the way down until you hear a clicking sound.
CONNECTIONS
5 | 6 |
STAND | 7 | Push the cable into the cable fixing hole in the stand. |
| ||
| 8 | To fix the cable, insert the cable holder into the hole |
|
| on the stand. |
Speaker Packages
Please confirm that all the following contents are included in the package.
Speaker Accessories
Center Speaker
STAND BASE
SPEAKER STAND Screw Screw
6 | 7 | 8 |
Toroidal | System connection |
Ferrite Core | cable - main unit |
9 | 10 |
BACK COVER
9 Let the cable run through the hole at the bottom of the back cover and close the back cover.
10 Tighten 2 screws at the bottom of the back cover.
11 Open a Toroidal Ferrite Core by pulling it upward. Wrap it around of the system connection cable so it will be next to the DVD Player. Close it back by press- ing it all the way down until you hear a clicking sound.
• The Toroidal Ferrite Core is designed to reduce electromagnetic waves that may cause interference.
Stand Packages
Please confirm that all the following contents are included in the package.
Front/Rear Speaker (4EA) | Subwoofer Speaker | Speaker Cable (5EA) |
*Front speakers and rear speakers are packaged separately as shown in the diagram.
11
BACK COVER
STAND
STAND BASE
Screw (6EA)
12
System connection cable - Main Unit to Subwoofer
Cable Holder (3EA)
13
