Samsung HT-TZ325T/UMG, HT-Z220T/MEA manual Front/Rear Tallboy Stand, Installing the Cradle Stand

Installing the Cradle Stand

HT-Z420 - Front Speakers

1.Insert the stand so that it fits into the hole as described in the figure.

2.Turn the stand clockwise to lock it. (Turning it counter-clockwise will loosen it.)

3.This is the completion of the stand installation.

Front/Rear Tallboy Stand

<Front>

1

2

3

ENG

●connections

How to Install the Speaker on the Stand

HT-TZ322/TZ422 - Front Speakers

HT-TZ325/TZ425 - Front/Rear Speakers 1

1.Turn the STAND upside-down and connect it to the STAND BASE.

2.Insert five small SCREWS into the five holes marked with arrows using a screwdriver as shown in the illustration.

3.	Connect upper SPEAKER to the assembled	3
	STAND.
4.	Insert another large SCREW into the hole on
	the rear of the speaker marked with arrow
	using a screwdriver.

STAND BASE

STAND

2

4

19