Baldor BXII Receiving and inspection, Installed in, 2.2.1Identifying the catalog number

2.2 Receiving and inspection

When you receive your NextMove BXII, there are several things you should do immediately:

1.Check the condition of the packaging and report any damage immediately to the carrier that delivered your NextMove BXII.

2.Remove the NextMove BXII from the shipping container. The packing materials may be retained for future shipment.

3.Verify that the catalog number of the NextMove BXII you received is the same as the catalog number listed on your purchase order. The catalog/part number is described in the next section.

4.Inspect the NextMove BXII for external damage during shipment and report any damage to the carrier that delivered it.

5.If the NextMove BXII is to be stored for several weeks before use, be sure that it is stored in a location that conforms to the storage humidity and temperature specifications shown in section 7.1.10.

2.2.1Identifying the catalog number

NextMove BXII is available with different specifications. As a reminder of which model has been installed, it is a good idea to write the catalog number in the space provided below.

Catalog number: NMX004-_______
Installed in: ________________________	Date: ______

A description of the catalog numbers are shown in the following table:

Catalog	Description
number
NMX004-501NextMove BXII, for control of 2 axes
NMX004-502	NextMove BXII, for control of 3 axes
NMX004-503	NextMove BXII, for control of 4 axes

2-2 Introduction MN1904