3.2.1 Mounting the NextMove BXII
Ensure you have read and understood the Mechanical installation and location requirements in section 3.2. Mount the NextMove BXII on its rear side, the side opposite the front panel.
The NextMove BXII must be mounted upright to ensure adequate cooling. M5 bolts or screws should be used.
194 (7.6) | 58.5 (2.3) |
All dimensions shown as mm (inches)
302 (11.9) | 312 (12.3) |
203 (8.0) | 40 (1.6) |
(Allow additional depth to accommodate wiring)
Figure 1 - Package dimensions
This completes the basic installation.
You should read the following sections in sequence before using the NextMove BXII.
MN1904 |
