3.In the Select Controller dialog, go to the drop down box near the top and select the PC serial port to which the NextMove BXII is connected.
(If you are unsure which PC serial port is connected to the NextMove BXII, select Scan all serial ports. During the detection process, a dialog box may be displayed to tell you that WorkBench v5 has detected new firmware. Click OK to continue.)
Click Scan to search for the NextMove BXII.
When the search is complete, click on NextMove BXII in the list to highlight it, and click the Select button.
Note: If the NextMove BXII is not listed, check the serial lead between the NextMove BXII and the PC. Check that the NextMove BXII is powered correctly. Click Scan to
When detection is complete,
MN1904 | Operation |