To Change the Program

1

Press the Up/Down ( ▲ / ▼ ) button to select the track number to be changed.

2

Press the Enter button to select the title or chapter to be changed.

3

Press the Clear button and then press the Number buttons.

4

Press the Enter button.

•The cursor moves to the number below.

• The cursor moves to the next

• You can use also just the

number when the Enter button

Left/Right ( ▲ / ▲) button.

is pressed again.

 

5

Repeat steps 1-4 above to change the program.

OPERATION

To delete the entire Program

•Press the Stop ( ) button twice during playback.

•Press the Stop ( ) button once when in the Stop mode.

•Press the Open/Close ( ) button on the main unit.

The disc tray will open and then close. The program will then be deleted.

When you have entered a wrong number

Press the Clear button.

Clear

You can program or change particular tracks for VCD or CD discs in the same manner.

•When you want to delete a selection during programming, select the track (or chapter, or title) to be deleted and then press the Clear button.

26