To increase Effect level

To increase Effect level

Press the DSP/DPL II Effect button.

•The effect level can be set in steps from 1 to 4 EFFECT1 ➔ EFFECT2 ➔ EFFECT3 ➔ OFF(DEFAULT).

Each time the button is pressed the selection moves to the next effect.

•The higher the number, the stronger the DSP surround effect will be.

Effect

What is a Effect?

This sets the strength of the DSP mode.

•This function works only in the DSP Mode.

Adjusting DSP Sound Parameters

You can fine-adjust DSP modes more minutely by changing three parameters— room, liveness, and reverberation.

1

Press the DSP/DPL II Mode button.

SETUP

2

Press the Sound Edit button.

•Each time you press the button, the indication on the display changes as follows:

00 F 00 00 R 00 REAR SW

Normal REVERB LIVE ROOM indication

(canceled)

ROOM : To adjust the resonance based on the room size. The larger this value is, the more effective the resonance is (from 04 to 16 by 2 steps).

LIVE (Liveness) : To adjust the liveness. The larger this value is, the more liveness is obtained (from 04 to 16 by 2 steps).

REVERB (Reverberation) : To adjust the reverberation time of the sound (from 0.0 msec to 1.6 msec by 0.2 msec steps).

3

Press the Left/Right (▲ / ▲) button to adjust the DSP sound parameter.

• This function works only in the DSP Mode.

38