Insert Remote Batteries

1 Remove the battery cover on the back of the remote by pressing down and sliding the cover in the direction of the arrow.

2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –).

3 Replace the battery cover.

Follow these precautions to avoid leaking or cracking cells:

 

 

•

Place batteries in the remote control so they match the

CAUTION

polarity:(+) to (+)and (–)to (–).

 

 

•

Use the correct type of batteries.Batteries that look similar

 

 

 

 

 

may differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

Range of Operation of the Remote Control

The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.

30

30

7~10m

To open the remote control cover, push the top of the cover, then slide downward.

PREPARATION

Listening on headphones

Listening on headphones

Use headphones (not supplied) for private listening pleasure.

Connect the headphones to the HEADPHONES jack of the front panel.

•No sound is produced from the speakers.

•To prevent hearing damage, do not raise the volume level excessively when using headphones.

HEADPHONE jack

8