Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.

Remote Control Unit

 

1

Press TUNER/
Tune in to the
BAND button.
2 desired station.

The selection toggles back and forth between "FM AM" each time the TUNER(BAND) button is pressed.

Automatic Tuning 1

Automatic Tuning 2

Manual Tuning

When is pressed, a preset broadcast station is selected.

Press and hold to automatically search for active broadcasting stations.

Briefly press to increase or decrease the frequency incrementally.

Main Unit

Press the Function1button to select the desired band (FM, AM).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ()
button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2 Press the STOP () buttonto select "MANUAL" and

then press and hold button to automatically search the band.

Manual Tuning Press STOP () to select MANUAL and then briefly

press to tune in to a lower or higher frequency.
Press MO/ST button to listen in Mono/Stereo.(This applies only when listening to an FM station.)

63

Each time the button is pressed, the sound switches between "STEREO" and "MONO". In a poor reception area, select MONO for a clear, interference-free broadcast.