Samsung HW-C779S/XEG manual Connecting the Speakers, Connecting Speaker Wire

Connections

CONNECTING THE SPEAKERS

FRONT (R)	SURROUND(R)	SURROUNDBACK(R)	SURROUNDBACK(L)	SURROUND(L)	FRONT (L)
PS-FC770S	PS-RC770S	PS-BC770S	PS-BC770S	PS-RC770S	PS-FC770S

ACTIVE SUBWOOFER (BUILT-IN POWER AMPLIFIER) PS-AW730

CENTRE

PS-CC770S

Model HW-C700/C700B

AV Receiver	HW-C700/C700B
Model HW-C770S/C779S/C770BS
AV Receiver	HW-C770S/C779S/
	C770BS
FRONT SPEAKER	PS-FC770S
CENTRE SPEAKER	PS-CC770S
SURROUND SPEAKER	PS-RC770S
SURROUND BACK SPEAKER	PS-BC770S
ACTIVE SUBWOOFER	PS-AW730

M One Active Subwoofer is provided, if you would like to use another, purchase it from the retailer where you bought the player and connect it to the other SUBWOOFER OUT Jack.

When using Dolby Pro Logic IIz, connect the Surround Back Speakers (FHL, FHR) to SURROUND BACK/FRONT HEIGHT Jack.

Connecting Speaker Wire

1. Loosen the knob by turning counterclockwise.

2. Insert the bare part of the wire into the hole in the side of each terminal.

3. Tighten the knob by turning clockwise to secure the wire.

M Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands or objects into the duct (hole).

Never touch speaker terminals while the power is on. Doing so could result in electric shock.

Make sure the polarities (+ and -) are correct.

Connecting the Speakers

1. Press down the terminal tab on the back of the speaker.

2.Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab.

3. Connect the connecting plugs to the back of the AV Receiver.

Black

Red

• Make sure the colours of the speaker terminals on the back of the AV receiver match the colours of the connecting plugs.

16

HW-C700-C770S-C770BS-ELS_0309.in16 16 2010-03-09 ￿￿ 10:28:32