USING AN iPod (Continued)
Watching a Movie (iPod Video function)
ENG
You can play video files stored in the iPod player on a TV by connecting it to the AV receiver.
1.Connect the iPod dock connector to the iPod jack on the AV receiver.
2.In the iPod screen, move to Videos > Settings and set the TV Out option to On.
3.Place the iPod in the dock.
4.Press the INPUT SELECT button on the remote control to select IPOD VIDEO mode.
5.Set the AV IN option of the TV connected to the AV receiver to
COMPOSITE.
Follow the iPod onscreen guide through the following steps.
6.Press the S,T buttons on the remote control to select Videos and press the ENTER button.
7.Press the S,T buttons on the remote control to select Movies and press the ENTER button.
8.Press the S,T buttons to select the file to play and press the ENTER button.
•The iPod's video files will be played on the TV screen.
9.You can use the remote control to control simple playback functions such as the PLAY, PAUSE, STOP, SKIP (#,$) buttons.
•If you press the PREV button within 3 seconds after the playback, the player will stop playing and return to the list screen.
If you press the PREV button 3 seconds or later after the playback, the player will move to the start screen of the current file.
•Press the STOP button to stop playing and return to the list screen.
•Press the RETURN button to return to the previous menu.
<iPod Screen>
<iPod Screen>
● OPERATION
M You must have the VIDEO (Monitor or VCR) output connected to your TV to view iPod video.
See page 26 for compatible iPods.
Compatibility depends on the software version of your iPod.
When the current file is played to the end, the next file will not be played automatically. To play the next file, select a file to play in the list screen of the iPod player.
No other screen than the playback one will appear on the TV screen. Check other screens on the iPod player.
51
