Samsung HW-J480/XE manual Installing the Battery in the Remote Control

DESCRIPTIONS

Power

Turns the Soundbar on and off.

Volume

Adjusts the volume level of the unit.

Play / Pause

Press the p button to pause a file temporarily.

Press the p button again to play the selected file.

Skip Back

If there is more than one file on the device you are playing, and you press the [ button, the previous file is selected.

SURR. LEVEL

Press the SURR. LEVEL button. Then, use the [,] buttons to adjust

Surround Speaker volume from -6 to +6.

SURR. MODE Press the SURR. MODE button on the remote to turn SURROUND SPEAKER on and off. Each time the button is pressed, the selection changes as follows :

ON - SURROUND SPEAKER  OFF - SURROUND SPEAKER

Bluetooth POWER

Press the Bluetooth POWER button on the remote to turn the Bluetooth

POWER On function on and off.

See pages 20 and 22 for details.

WOOFER

You can control the woofer volume.

Press the Woofer button, and then press the [,] buttons to increase or decrease the subwoofer volume. You can select SW (-12, -6,-5,-4,-3,-2, -1,0,+1,+2,+3,+4,+5,+6).

INSTALLING THE BATTERY IN THE REMOTE CONTROL

1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.

2.Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on and align the '●' marks side by side as shown in the figure above.

3.Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.

10