1. Place the Wall Mount Guide against the wall

c If the markings do not correspond to the

surface.

positions of studs, make sure you insert

The Wall Mount Guide must be level.

appropriate anchors or mollies into the holes

If your TV is mounted on the wall, install the

before you insert the support screws. If you use

 

anchors or mollies, make sure the holes you drill

 

Soundbar at least 5 cm below the TV.

 

are large enough for the anchors or mollies you

use.

5 cm or more

5. Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support screw hole.

2. Align the Paper Template's Centre Line with the centre of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall using tape.

cIf you are not mounting below a TV, place the Centre Line in the centre of the installation area.

6. Use the two Screws (M4 x L12) to attach both Bracket-Wall Mount L and R to the Soundbar's bottom. For a proper fit, make sure to align the bumps on the Soundbar to the holes on the brackets.

A

B

CENTER LINE

A-TYPE : 616mm

B

A

B-TYPE : 360mm

 

 

Centre Line

3.Push a pen tip or sharpened pencil tip through the centre of the B-TYPE images on each end of the Guide to mark the holes for the supporting screws, and then remove the Wall Mount Guide.

4.Using an appropriately sized drill bit, drill a hole in the wall at each marking.

· 12 · English

Page 12
Image 12
Samsung HW-K440/XE manual If your TV is mounted on the wall, install, Soundbar at least 5 cm below the TV, Centre Line